Ремонт переднего моста нива 21214 своими руками

Ремонт переднего моста Нива 21214 своими руками

The Lada Niva 21214 is a perfect example of a “go-anywhere-do-anything” type of vehicle. Known for its all-terrain capabilities, this off-road vehicle is often seen in tough and remote environments, making it essential to ensure its front axle is in good shape.

If you’re the type of person who enjoys tinkering with cars and saving a few bucks in repair costs, then a do-it-yourself front axle repair could be right up your alley. Here’s a step-by-step guide to help you repair your Niva 21214’s front axle.

The Tools You’ll Need

— Socket and wrench set
— Screwdrivers
— Wire cutters
— Pliers
— Safety goggles
— Gloves
— Jack stands
— Floor jack or bottle jack
— Replacement front axle components (if needed)

Step 1: Lift Your Vehicle

To work on your car’s front axle, you’ll need to lift it off the ground. Using a floor jack or bottle jack, raise the vehicle to a comfortable height. Make sure to secure it with jack stands before getting under it.

Step 2: Remove the Wheel

To access your car’s front axle, you’ll need to remove the wheel. Use a socket set and wrench to loosen and remove the lug nuts. Once done, take the wheel off and set it aside.

Step 3: Remove the Brake Caliper

With the wheel off, you can now move on to remove the brake caliper. Using a socket set, remove the bolts that are securing it in place. Once free, set it aside, being careful not to damage the brake line.

Step 4: Remove the Axle Shaft

To remove the axle shaft, you’ll need to detach it from the differential. This will require removing the axle nut using a socket and wrench. Use a puller to extract it from the differential hub.

Step 5: Replace any Broken Components

This is also a good time to inspect any other components, such as the CV joint, that may have caused damage to your front axle. Replace any worn or damaged parts that may affect the performance of your vehicle.

Step 6: Reassemble Your Front Axle

To reassemble your front axle, start by reinserting the axle shaft back into the differential hub. Tighten the axle nut to the manufacturer’s recommended torque specification. Then, reattach the brake caliper to its original position. Finish off by replacing the wheel and tightening the lug nuts using your fingers.

Step 7: Lower the Vehicle

With everything back in place, use your floor jack or bottle jack to lower your vehicle back to the ground. Then use a torque wrench to finish tightening the lug nuts to the manufacturer’s recommended specification.

In conclusion, repairing your Niva 21214’s front axle can seem like a daunting task, but it is doable. Following the above steps can help you save a considerable amount of money on repairs, as well as give you the satisfaction of having done it yourself. However, if you feel uncomfortable or unsure about any of the steps, it’s always best to take your vehicle to a professional mechanic.